Nixa Epoxy Floors · Nixa, MO
Epoxy Floor Repair and Recoat in Nixa, Missouri
An epoxy recoat renews a worn topcoat on a floor whose basecoat is still bonded to the concrete.
Nixa Epoxy Floors assesses the existing floor first, because a coating that is delaminating cannot be saved by another layer on top of it.
If the bond is sound, a recoat is a one-day job. If it is not, the old system comes off and the floor is rebuilt.
Get a project quote for epoxy floor repair and recoat
On-site measure first. One flat project price.
How do you tell a recoat from a rebuild?
Tap and pull. A hollow sound under a tap and a coating that lifts under a knife means the film has released from the slab. That floor gets removed, not recoated.
A floor that is simply dull, scratched, or ambered from UV but still tightly bonded is a recoat candidate. Scuff-sand the surface, clean it, and lay a fresh clear topcoat.
- Hollow tap or lifting edges — rebuild
- Bubbles or blisters — moisture problem, test before touching it
- Dull, scratched, or yellowed only — recoat
- Hot-tire lift in the parking spots only — spot repair and recoat
What causes hot-tire pickup?
A warm tire softens a thin or weakly bonded coating and pulls it off the slab when the car sits. It shows up as bare patches exactly where the tires park.
The cure is film build and preparation, not a better sealer. Nixa Epoxy Floors grinds those areas back to concrete before rebuilding them.
How is epoxy floor repair and recoat priced?
Quoted as one complete project after the on-site assessment.
Assessment
On-site adhesion and moisture testing with a written recommendation.
Recoat
Scuff-sand, clean, and apply a fresh clear topcoat over a sound existing system.
Rebuild
Full removal of the failed system and a new ground-and-coated floor.
Epoxy Floor Repair and Recoat questions
- Can you fix a peeling garage floor without redoing the whole thing?
- Sometimes. If the failure is limited to the parking areas and the rest is bonded, those zones are ground back and rebuilt, then the whole floor gets a fresh topcoat.
- How often does an epoxy floor need a recoat?
- A residential floor typically wants a fresh clear topcoat somewhere in the 10 to 15 year range. Commercial floors under forklift traffic come up much sooner.
- My floor has bubbles. What happened?
- Bubbles and blisters almost always mean moisture vapor coming up through the slab. Nixa Epoxy Floors moisture-tests before quoting anything on a blistered floor.
- Can you recoat a floor another company installed?
- Yes, once the existing system is identified and adhesion-tested. Nixa Epoxy Floors will tell you plainly if it is not worth saving.
Where Nixa Epoxy Floors installs this
- Repair & Recoat in NixaNixa Epoxy Floors is based in Nixa, Missouri and coats garage floors, basements, shops, and commercial slabs throughout the city.
- Repair & Recoat in OzarkNixa Epoxy Floors coats garage floors, basements, and shop slabs throughout Ozark, Missouri, roughly ten minutes east of the home base in Nixa.
- Repair & Recoat in SpringfieldNixa Epoxy Floors installs commercial, warehouse, and residential floor coatings throughout Springfield, Missouri.
- Repair & Recoat in WillardNixa Epoxy Floors coats shop floors, pole barn slabs, and residential garages throughout Willard, Missouri, in northwest Greene County.
Other systems
- Garage Floor Epoxy Coating
- Polyaspartic and Polyurea Floor Coating
- Basement Floor Coating
- Commercial and Warehouse Epoxy Flooring
- Metallic Epoxy Floors
- Concrete Grinding and Surface Prep
Still deciding? The FAQ hub answers the questions that come up on every estimate, or send the slab details and get a call back.